Post by LinuxeroPost by LinuxeroHe cambiado a Debian Squeeze, pero no me reconoce la disquetera,
quizás por
Puedes pegar un dmesg al conectar la disquetera ?
--------------------------------------------
Es mas largo que un dia sin pan.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-39squeeze1)
(***@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 9
20:49:59 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=0dc40a68-0c7c-47f2-8fbc-07f05f22aa9b ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff80000 (usable)
[ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff98000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff98000 - 00000000bffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffd0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbff80 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff80000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff80000 page 4k
[ 0.000000] kernel direct mapping tables up to bff80000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 1G
[ 0.000000] kernel direct mapping tables up to 140000000 @ 12000-13000
[ 0.000000] RAMDISK: 3771d000 - 37fef4df
[ 0.000000] ACPI: RSDP 00000000000fb450 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bff80000 0003C (v01 010710 RSDT2200
20100107 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bff80200 00084 (v01 010710 FACP2200
20100107 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address
or length: 0000000000000000/1 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000bff80450 0D37D (v01 A1365 A1365001
00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bff98000 00040
[ 0.000000] ACPI: APIC 00000000bff80390 0007C (v01 010710 APIC2200
20100107 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bff80410 0003C (v01 010710 OEMMCFG
20100107 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bff98040 00072 (v01 010710 OEMB2200
20100107 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bff8f450 00038 (v01 010710 OEMHPET
20100107 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bff8f490 00672 (v01 A M I POWERNOW
00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000041fff] pages 28
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001686594] TEXT DATA BSS ==>
[0001000000 - 0001686594]
[ 0.000000] #3 [003771d000 - 0037fef4df] RAMDISK ==>
[003771d000 - 0037fef4df]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==>
[000009ec00 - 0000100000]
[ 0.000000] #5 [0001687000 - 0001687350] BRK ==>
[0001687000 - 0001687350]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff880001800000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bff80
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048334
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3824 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767928 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bff80000 -
00000000bff98000
[ 0.000000] PM: Registered nosave memory: 00000000bff98000 -
00000000bffd0000
[ 0.000000] PM: Registered nosave memory: 00000000bffd0000 -
00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 -
00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:3f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005200000 s90328 r8192
d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1030312
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=0dc40a68-0c7c-47f2-8fbc-07f05f22aa9b ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.000000] Memory: 4053596k/5242880k available (3082k kernel code,
1049544k absent, 139740k reserved, 1873k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:456
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2819.200 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5638.39 BogoMIPS (lpj=11276784)
[ 0.008018] Security Framework initialized
[ 0.008022] SELinux: Disabled at boot.
[ 0.008258] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.009467] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.012160] Mount-cache hash table entries: 256
[ 0.012250] Initializing cgroup subsys ns
[ 0.012253] Initializing cgroup subsys cpuacct
[ 0.012255] Initializing cgroup subsys devices
[ 0.012257] Initializing cgroup subsys freezer
[ 0.012259] Initializing cgroup subsys net_cls
[ 0.012274] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.012276] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012278] CPU 0/0x0 -> Node 0
[ 0.012280] tseg: 0000000000
[ 0.012288] CPU: Physical Processor ID: 0
[ 0.012289] CPU: Processor Core ID: 0
[ 0.012291] mce: CPU supports 6 MCE banks
[ 0.012299] Performance Events: AMD PMU driver.
[ 0.012302] ... version: 0
[ 0.012303] ... bit width: 48
[ 0.012304] ... generic registers: 4
[ 0.012305] ... value mask: 0000ffffffffffff
[ 0.012306] ... max period: 00007fffffffffff
[ 0.012307] ... fixed-purpose events: 0
[ 0.012308] ... event mask: 000000000000000f
[ 0.012866] ACPI: Core revision 20090903
[ 0.024051] Setting APIC routing to flat
[ 0.024341] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064566] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 1/0x1 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.152097] CPU1: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.152103] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156050] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.012000] Initializing CPU#2
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 2/0x2 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 2
[ 0.244081] CPU2: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.244086] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.248010] Brought up 3 CPUs
[ 0.248012] Total of 3 processors activated (16888.44 BogoMIPS).
[ 0.249795] CPU0 attaching sched-domain:
[ 0.249798] domain 0: span 0-2 level MC
[ 0.249800] groups: group ffff88000520fbf0 cpus 0 group
ffff88000524fbf0 cpus 1 group ffff88000528fbf0 cpus 2
[ 0.249807] CPU1 attaching sched-domain:
[ 0.249809] domain 0: span 0-2 level MC
[ 0.249810] groups: group ffff88000524fbf0 cpus 1 group
ffff88000528fbf0 cpus 2 group ffff88000520fbf0 cpus 0
[ 0.249815] CPU2 attaching sched-domain:
[ 0.249816] domain 0: span 0-2 level MC
[ 0.249818] groups: group ffff88000528fbf0 cpus 2 group
ffff88000520fbf0 cpus 0 group ffff88000524fbf0 cpus 1
[ 0.249883] devtmpfs: initialized
[ 0.252376] regulator: core version 0.5
[ 0.252376] NET: Registered protocol family 16
[ 0.252376] node 0 link 0: io port [1000, ffffff]
[ 0.252376] TOM: 00000000c0000000 aka 3072M
[ 0.252376] Fam 10h mmconf [e0000000, efffffff]
[ 0.252376] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.252376] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.252376] node 0 link 0: mmio [a0000, bffff]
[ 0.252376] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.252376] TOM2: 0000000140000000 aka 5120M
[ 0.252376] bus: [00,07] on node 0 link 0
[ 0.252376] bus: 00 index 0 io port: [0, ffff]
[ 0.252376] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.252376] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.252376] bus: 00 index 3 mmio: [c0000000, dfffffff]
[ 0.252376] bus: 00 index 4 mmio: [140000000, fcffffffff]
[ 0.252376] ACPI: bus type pci registered
[ 0.252376] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
[ 0.252376] PCI: Not using MMCONFIG.
[ 0.252376] PCI: Using configuration type 1 for base access
[ 0.252376] PCI: Using configuration type 1 for extended access
[ 0.252402] bio: create slab <bio-0> at 0
[ 0.252427] ACPI: EC: Look up EC in DSDT
[ 0.254641] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure,
AE_NOT_FOUND
[ 0.254645] ACPI Error (psparse-0537): Method parse/execution failed [\]
(Node ffffffff816699d0), AE_NOT_FOUND
[ 0.254725] ACPI Error (dswload-0781): [PRID] Namespace lookup failure,
AE_ALREADY_EXISTS
[ 0.254729] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog
(20090903/psloop-230)
[ 0.254732] ACPI Error (psparse-0537): Method parse/execution failed [\]
(Node ffffffff816699d0), AE_ALREADY_EXISTS
[ 0.254735] ACPI: Marking method \___ as Serialized because of
AE_ALREADY_EXISTS error
[ 0.254793] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.290566] ACPI: Interpreter enabled
[ 0.290569] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.290591] ACPI: Using IOAPIC for interrupt routing
[ 0.290642] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
[ 0.295033] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.299985] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.306906] ACPI Warning: Incorrect checksum in table [OEMB] - D0, should
be CB (20090903/tbutils-314)
[ 0.306988] ACPI: No dock devices found.
[ 0.307121] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.307193] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.307195] pci 0000:00:02.0: PME# disabled
[ 0.307229] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.307231] pci 0000:00:0a.0: PME# disabled
[ 0.307274] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007]
[ 0.307280] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003]
[ 0.307286] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007]
[ 0.307292] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003]
[ 0.307297] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f]
[ 0.307303] pci 0000:00:11.0: reg 24 32bit mmio: [0xf7fffc00-0xf7ffffff]
[ 0.307319] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.307359] pci 0000:00:12.0: reg 10 32bit mmio: [0xf7ffe000-0xf7ffefff]
[ 0.307408] pci 0000:00:12.1: reg 10 32bit mmio: [0xf7ffd000-0xf7ffdfff]
[ 0.307472] pci 0000:00:12.2: reg 10 32bit mmio: [0xf7fff800-0xf7fff8ff]
[ 0.307518] pci 0000:00:12.2: supports D1 D2
[ 0.307520] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.307523] pci 0000:00:12.2: PME# disabled
[ 0.307551] pci 0000:00:13.0: reg 10 32bit mmio: [0xf7ffc000-0xf7ffcfff]
[ 0.307600] pci 0000:00:13.1: reg 10 32bit mmio: [0xf7ffb000-0xf7ffbfff]
[ 0.307664] pci 0000:00:13.2: reg 10 32bit mmio: [0xf7fff400-0xf7fff4ff]
[ 0.307710] pci 0000:00:13.2: supports D1 D2
[ 0.307711] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.307715] pci 0000:00:13.2: PME# disabled
[ 0.307818] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.307824] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.307829] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.307835] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.307841] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.307959] pci 0000:00:14.5: reg 10 32bit mmio: [0xf7ffa000-0xf7ffafff]
[ 0.308087] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.308095] pci 0000:01:00.0: reg 14 64bit mmio pref:
[0xc0000000-0xdfffffff]
[ 0.308102] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.308106] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.308111] pci 0000:01:00.0: reg 30 32bit mmio pref:
[0xfbe80000-0xfbefffff]
[ 0.316068] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.316072] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.316075] pci 0000:00:02.0: bridge 64bit mmio pref:
[0xc0000000-0xdfffffff]
[ 0.316108] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.316121] pci 0000:02:00.0: reg 18 64bit mmio pref:
[0xf6fff000-0xf6ffffff]
[ 0.316131] pci 0000:02:00.0: reg 20 64bit mmio pref:
[0xf6ff8000-0xf6ffbfff]
[ 0.316137] pci 0000:02:00.0: reg 30 32bit mmio pref:
[0xfbff0000-0xfbffffff]
[ 0.316166] pci 0000:02:00.0: supports D1 D2
[ 0.316168] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316171] pci 0000:02:00.0: PME# disabled
[ 0.324076] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff]
[ 0.324079] pci 0000:00:0a.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.324082] pci 0000:00:0a.0: bridge 64bit mmio pref:
[0xf6f00000-0xf6ffffff]
[ 0.324117] pci 0000:03:05.0: reg 10 io port: [0xec00-0xec1f]
[ 0.324187] pci 0000:03:06.0: reg 10 io port: [0xe880-0xe8bf]
[ 0.324268] pci 0000:00:14.4: transparent bridge
[ 0.324271] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.324290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.324479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.324542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.324609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.328898] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.328992] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.329084] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.329175] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.329265] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
[ 0.329355] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.329446] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.329536] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.329605] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.329608] vgaarb: loaded
[ 0.329625] PCI: Using ACPI for IRQ routing
[ 0.329625] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.329625] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.330171] Switching to clocksource tsc
[ 0.330181] pnp: PnP ACPI init
[ 0.330181] ACPI: bus type pnp registered
[ 0.332580] pnp: PnP ACPI: found 14 devices
[ 0.332581] ACPI: ACPI bus type pnp unregistered
[ 0.332589] system 00:09: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.332592] system 00:09: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.332596] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.332598] system 00:0a: ioport range 0x40b-0x40b has been reserved
[ 0.332600] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
[ 0.332602] system 00:0a: ioport range 0xc00-0xc01 has been reserved
[ 0.332604] system 00:0a: ioport range 0xc14-0xc14 has been reserved
[ 0.332606] system 00:0a: ioport range 0xc50-0xc51 has been reserved
[ 0.332608] system 00:0a: ioport range 0xc52-0xc52 has been reserved
[ 0.332610] system 00:0a: ioport range 0xc6c-0xc6c has been reserved
[ 0.332612] system 00:0a: ioport range 0xc6f-0xc6f has been reserved
[ 0.332614] system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
[ 0.332616] system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
[ 0.332618] system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
[ 0.332620] system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
[ 0.332622] system 00:0a: ioport range 0xcd8-0xcdf has been reserved
[ 0.332624] system 00:0a: ioport range 0x800-0x89f has been reserved
[ 0.332626] system 00:0a: ioport range 0xb00-0xb0f has been reserved
[ 0.332628] system 00:0a: ioport range 0xb20-0xb3f has been reserved
[ 0.332630] system 00:0a: ioport range 0x900-0x90f has been reserved
[ 0.332633] system 00:0a: ioport range 0x910-0x91f has been reserved
[ 0.332635] system 00:0a: ioport range 0xfe00-0xfefe has been reserved
[ 0.332637] system 00:0a: iomem range 0xffb80000-0xffbfffff has been
reserved
[ 0.332640] system 00:0a: iomem range 0xfec10000-0xfec1001f has been
reserved
[ 0.332643] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.332645] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.332647] system 00:0b: ioport range 0x300-0x30f has been reserved
[ 0.332649] system 00:0b: ioport range 0xa30-0xa3f has been reserved
[ 0.332653] system 00:0c: iomem range 0xe0000000-0xefffffff has been
reserved
[ 0.332656] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.332658] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.332660] system 00:0d: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.332663] system 00:0d: iomem range 0x100000-0xbfffffff could not be
reserved
[ 0.332665] system 00:0d: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.337328] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.337330] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.337332] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbefffff
[ 0.337335] pci 0000:00:02.0: PREFETCH window:
0x000000c0000000-0x000000dfffffff
[ 0.337338] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 0.337340] pci 0000:00:0a.0: IO window: 0xd000-0xdfff
[ 0.337342] pci 0000:00:0a.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.337344] pci 0000:00:0a.0: PREFETCH window:
0x000000f6f00000-0x000000f6ffffff
[ 0.337347] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.337350] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.337354] pci 0000:00:14.4: MEM window: disabled
[ 0.337357] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.337366] alloc irq_desc for 18 on node 0
[ 0.337367] alloc kstat_irqs on node 0
[ 0.337372] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.337375] pci 0000:00:02.0: setting latency timer to 64
[ 0.337379] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.337381] pci 0000:00:0a.0: setting latency timer to 64
[ 0.337387] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.337389] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.337391] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.337393] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.337395] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff]
[ 0.337396] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.337398] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.337400] pci_bus 0000:02: resource 2 pref mem [0xf6f00000-0xf6ffffff]
[ 0.337401] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.337403] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.337405] pci_bus 0000:03: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.337424] NET: Registered protocol family 2
[ 0.337530] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.338285] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.340385] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.340666] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.340668] TCP reno registered
[ 0.340744] NET: Registered protocol family 1
[ 0.471783] pci 0000:01:00.0: Boot video device
[ 0.471821] Unpacking initramfs...
[ 0.620486] Freeing initrd memory: 9033k freed
[ 0.623576] PCI-DMA: Disabling AGP.
[ 0.623646] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.623648] PCI-DMA: using GART IOMMU.
[ 0.623650] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.625478] audit: initializing netlink socket (disabled)
[ 0.625491] type=2000 audit(1327279998.623:1): initialized
[ 0.627791] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.628722] VFS: Disk quotas dquot_6.5.2
[ 0.628757] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.628805] msgmni has been set to 7934
[ 0.628965] alg: No test for stdrng (krng)
[ 0.628996] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.628998] io scheduler noop registered
[ 0.628999] io scheduler anticipatory registered
[ 0.629001] io scheduler deadline registered
[ 0.629021] io scheduler cfq registered (default)
[ 0.629103] alloc irq_desc for 24 on node 0
[ 0.629105] alloc kstat_irqs on node 0
[ 0.629111] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.629115] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.629196] alloc irq_desc for 25 on node 0
[ 0.629198] alloc kstat_irqs on node 0
[ 0.629201] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
[ 0.629205] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.630078] Linux agpgart interface v0.103
[ 0.630105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.630199] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.630438] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.630544] alloc irq_desc for 20 on node 0
[ 0.630546] alloc kstat_irqs on node 0
[ 0.630551] serial 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 0.630667] 0000:03:05.0: ttyS1 at I/O 0xec00 (irq = 20) is a 16550A
[ 0.630770] 0000:03:05.0: ttyS2 at I/O 0xec08 (irq = 20) is a 16550A
[ 0.630838] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.630872] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.630874] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.630985] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.631049] mice: PS/2 mouse device common for all mice
[ 0.631080] rtc_cmos 00:02: RTC can wake from S4
[ 0.631110] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.631132] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.631141] cpuidle: using governor ladder
[ 0.631142] cpuidle: using governor menu
[ 0.631145] No iBFT detected.
[ 0.631348] TCP cubic registered
[ 0.631416] NET: Registered protocol family 10
[ 0.631906] Mobile IPv6
[ 0.631908] NET: Registered protocol family 17
[ 0.631959] PM: Resume from disk failed.
[ 0.631965] registered taskstats version 1
[ 0.632225] rtc_cmos 00:02: setting system clock to 2012-01-23 00:53:18
UTC (1327279998)
[ 0.632254] Initalizing network drop monitor service
[ 0.632273] Freeing unused kernel memory: 592k freed
[ 0.632374] Write protecting the kernel read-only data: 4220k
[ 0.642881] udev[93]: starting version 164
[ 0.649310] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 0.687517] usbcore: registered new interface driver usbfs
[ 0.687538] usbcore: registered new interface driver hub
[ 0.687557] usbcore: registered new device driver usb
[ 0.692643] SCSI subsystem initialized
[ 0.695464] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.695507] alloc irq_desc for 17 on node 0
[ 0.695509] alloc kstat_irqs on node 0
[ 0.695515] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 0.695541] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.695563] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 0.695594] ehci_hcd 0000:00:12.2: debug port 1
[ 0.695614] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7fff800
[ 0.705336] libata version 3.00 loaded.
[ 0.707199] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.707215] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.707217] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.707219] usb usb1: Product: EHCI Host Controller
[ 0.707220] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.707222] usb usb1: SerialNumber: 0000:00:12.2
[ 0.707308] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.707324] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 0.707356] r8169 0000:02:00.0: setting latency timer to 64
[ 0.707385] alloc irq_desc for 26 on node 0
[ 0.707386] alloc kstat_irqs on node 0
[ 0.707396] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
[ 0.707771] r8169 0000:02:00.0: eth0: RTL8168d/8111d at
0xffffc90000666000, 48:5b:39:10:67:97, XID 083000c0 IRQ 26
[ 0.707788] usb usb1: configuration #1 chosen from 1 choice
[ 0.707812] hub 1-0:1.0: USB hub found
[ 0.707817] hub 1-0:1.0: 6 ports detected
[ 0.707892] alloc irq_desc for 19 on node 0
[ 0.707894] alloc kstat_irqs on node 0
[ 0.707897] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 0.707908] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.707914] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 0.707938] ehci_hcd 0000:00:13.2: debug port 1
[ 0.707955] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7fff400
[ 0.719168] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.719182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.719184] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.719186] usb usb2: Product: EHCI Host Controller
[ 0.719187] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.719189] usb usb2: SerialNumber: 0000:00:13.2
[ 0.719243] usb usb2: configuration #1 chosen from 1 choice
[ 0.719261] hub 2-0:1.0: USB hub found
[ 0.719266] hub 2-0:1.0: 6 ports detected
[ 0.719354] ahci 0000:00:11.0: version 3.0
[ 0.719364] alloc irq_desc for 22 on node 0
[ 0.719365] alloc kstat_irqs on node 0
[ 0.719370] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.719461] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 0.719464] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp
pio slum part ccc
[ 0.719647] scsi0 : ahci
[ 0.719718] scsi1 : ahci
[ 0.719758] scsi2 : ahci
[ 0.719798] scsi3 : ahci
[ 0.719827] ata1: SATA max UDMA/133 abar ***@0xf7fffc00 port 0xf7fffd00
irq 22
[ 0.719830] ata2: SATA max UDMA/133 abar ***@0xf7fffc00 port 0xf7fffd80
irq 22
[ 0.719833] ata3: SATA max UDMA/133 abar ***@0xf7fffc00 port 0xf7fffe00
irq 22
[ 0.719836] ata4: SATA max UDMA/133 abar ***@0xf7fffc00 port 0xf7fffe80
irq 22
[ 0.720386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.720425] alloc irq_desc for 16 on node 0
[ 0.720427] alloc kstat_irqs on node 0
[ 0.720431] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.720449] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.720459] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 3
[ 0.720480] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7ffe000
[ 0.779030] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.779032] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.779034] usb usb3: Product: OHCI Host Controller
[ 0.779035] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.779037] usb usb3: SerialNumber: 0000:00:12.0
[ 0.779095] usb usb3: configuration #1 chosen from 1 choice
[ 0.779112] hub 3-0:1.0: USB hub found
[ 0.779119] hub 3-0:1.0: 3 ports detected
[ 0.779196] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.779208] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.779214] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus
number 4
[ 0.779229] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7ffd000
[ 0.838888] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.838891] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.838892] usb usb4: Product: OHCI Host Controller
[ 0.838894] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.838895] usb usb4: SerialNumber: 0000:00:12.1
[ 0.838947] usb usb4: configuration #1 chosen from 1 choice
[ 0.838965] hub 4-0:1.0: USB hub found
[ 0.838972] hub 4-0:1.0: 3 ports detected
[ 0.839061] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.839080] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 0.839132] scsi4 : pata_atiixp
[ 0.839177] scsi5 : pata_atiixp
[ 0.840285] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq
14
[ 0.840286] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq
15
[ 0.840385] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 0.840407] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.840416] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 5
[ 0.840442] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7ffc000
[ 0.898740] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.898742] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.898744] usb usb5: Product: OHCI Host Controller
[ 0.898745] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.898747] usb usb5: SerialNumber: 0000:00:13.0
[ 0.898800] usb usb5: configuration #1 chosen from 1 choice
[ 0.898818] hub 5-0:1.0: USB hub found
[ 0.898825] hub 5-0:1.0: 3 ports detected
[ 0.898907] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 0.898919] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.898925] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 6
[ 0.898940] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7ffb000
[ 0.958598] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.958600] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.958602] usb usb6: Product: OHCI Host Controller
[ 0.958603] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.958604] usb usb6: SerialNumber: 0000:00:13.1
[ 0.958654] usb usb6: configuration #1 chosen from 1 choice
[ 0.958674] hub 6-0:1.0: USB hub found
[ 0.958681] hub 6-0:1.0: 3 ports detected
[ 0.958761] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 0.958775] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.958782] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus
number 7
[ 0.958796] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7ffa000
[ 1.010909] ata5.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 1.010932] ata5.01: ATAPI: HL-DT-STDVD-RAM GH22NP21, 1.00, max UDMA/66
[ 1.010947] ata5.01: limited to UDMA/33 due to 40-wire cable
[ 1.018532] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.018534] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.018536] usb usb7: Product: OHCI Host Controller
[ 1.018537] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.018539] usb usb7: SerialNumber: 0000:00:14.5
[ 1.018585] usb usb7: configuration #1 chosen from 1 choice
[ 1.018603] hub 7-0:1.0: USB hub found
[ 1.018612] hub 7-0:1.0: 2 ports detected
[ 1.026983] ata5.00: configured for UDMA/33
[ 1.038609] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.040793] ata5.01: configured for UDMA/33
[ 1.184013] usb 4-2: new low speed USB device using ohci_hcd and address
2
[ 1.196030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.196033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.196055] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.197070] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 1.197073] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.197085] ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 1.197087] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.197109] ata2.00: ATA-8: ST3500418AS, CC46, max UDMA/133
[ 1.197111] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.198299] ata1.00: configured for UDMA/133
[ 1.198326] ata3.00: configured for UDMA/133
[ 1.198341] ata2.00: configured for UDMA/133
[ 1.212785] scsi 0:0:0:0: Direct-Access ATA ST3500418AS
CC38 PQ: 0 ANSI: 5
[ 1.212944] scsi 1:0:0:0: Direct-Access ATA ST3500418AS
CC46 PQ: 0 ANSI: 5
[ 1.213049] scsi 2:0:0:0: Direct-Access ATA ST3500418AS
CC38 PQ: 0 ANSI: 5
[ 1.216381] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B
0L06 PQ: 0 ANSI: 5
[ 1.217532] scsi 4:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NP21
1.00 PQ: 0 ANSI: 5
[ 1.350708] usb 4-2: New USB device found, idVendor=046d, idProduct=c018
[ 1.350711] usb 4-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.350713] usb 4-2: Product: USB Optical Mouse
[ 1.350714] usb 4-2: Manufacturer: Logitech
[ 1.350767] usb 4-2: configuration #1 chosen from 1 choice
[ 1.387278] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.387309] sd 0:0:0:0: [sda] Write Protect is off
[ 1.387311] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.387324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.387407] sda:
[ 1.387512] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.387546] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.387549] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.387551] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.387566] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.387578] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.387580] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.387592] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.387680] sdb:
[ 1.387703] sdc: sdb1 sdb2 <sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2
cdda tray
[ 1.398031] Uniform CD-ROM driver Revision: 3.20
[ 1.398095] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.401496] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 1.401557] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 1.405074] sda1 sda2 < sdc1
[ 1.406029] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.411396] sdb5 >
[ 1.411569] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.434122] sda5 >
[ 1.434306] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.437276] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.437297] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.437314] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.437330] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 1.437347] sr 4:0:1:0: Attached scsi generic sg4 type 5
[ 1.616684] usb 4-3: new full speed USB device using ohci_hcd and address
3
[ 1.783683] usb 4-3: New USB device found, idVendor=057b, idProduct=0000
[ 1.783685] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.783687] usb 4-3: Product: USB Floppy Drive
[ 1.783689] usb 4-3: Manufacturer: Y-E DATA
[ 1.783751] usb 4-3: configuration #1 chosen from 1 choice
[ 1.794701] Initializing USB Mass Storage driver...
[ 1.794773] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.794827] usb-storage: device found at 3
[ 1.794828] usb-storage: waiting for device to settle before scanning
[ 1.794844] usbcore: registered new interface driver usb-storage
[ 1.794846] USB Mass Storage support registered.
[ 1.796759] usbcore: registered new interface driver hiddev
[ 1.800772] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input2
[ 1.800812] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-2/input0
[ 1.800827] usbcore: registered new interface driver usbhid
[ 1.800829] usbhid: v2.6:USB HID core driver
[ 1.838082] PM: Starting manual resume from disk
[ 1.838085] PM: Resume from partition 8:5
[ 1.838086] PM: Checking hibernation image.
[ 1.841100] PM: Error -22 checking image file
[ 1.841102] PM: Resume from disk failed.
[ 1.903489] kjournald starting. Commit interval 5 seconds
[ 1.903494] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.999149] udev[513]: starting version 164
[ 3.254615] ACPI: WMI: Mapper loaded
[ 3.257170] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 3.257175] ACPI: Power Button [PWRB]
[ 3.257215] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.257218] ACPI: Power Button [PWRF]
[ 3.310862] processor LNXCPU:00: registered as cooling_device0
[ 3.310982] processor LNXCPU:01: registered as cooling_device1
[ 3.311011] processor LNXCPU:02: registered as cooling_device2
[ 3.311366] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.362713] EDAC MC: Ver: 2.1.0 Jan 9 2012
[ 3.428912] parport_pc 00:05: reported by Plug and Play ACPI
[ 3.428962] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 3.434806] EDAC amd64_edac: Ver: 3.2.0 Jan 9 2012
[ 3.434926] EDAC amd64: This node reports that Memory ECC is currently
disabled, set F3x44[22] (0000:00:18.3).
[ 3.434933] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 3.434934] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
[ 3.434935] (Note that use of the override may cause unknown side
effects.)
[ 3.434944] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 3.564237] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with
ACPI region SOR1 [0xb00-0xb0f]
[ 3.564291] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 3.650315] [drm] Initialized drm 1.1.0 20060810
[ 3.985982] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 3.985987] nouveau 0000:01:00.0: setting latency timer to 64
[ 3.987721] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card
(0x096000c1)
[ 3.988469] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image
from PRAMIN
[ 4.048809] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 4.048812] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 4.048814] [drm] nouveau 0000:01:00.0: Bios version 62.94.4b.00
[ 4.048817] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not
currently supported
[ 4.048819] [drm] nouveau 0000:01:00.0: Found Display Configuration Block
version 4.0
[ 4.048821] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5
16 4
[ 4.048823] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0
tag 0xff
[ 4.048825] [drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1
tag 0x07
[ 4.048827] [drm] nouveau 0000:01:00.0: 2: 0x00002261: type 0x61 idx 2
tag 0x08
[ 4.048829] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000310
00000028
[ 4.048831] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01011302
00000030
[ 4.048832] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011300
00000028
[ 4.048834] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022332
00020010
[ 4.048841] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at
offset 0xD20A
[ 4.100120] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at
offset 0xD657
[ 4.116011] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at
offset 0xE6A7
[ 4.116020] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at
offset 0xE7F0
[ 4.127220] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at
offset 0xEA5C
[ 4.127223] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at
offset 0xEAC1
[ 4.148010] [drm] nouveau 0000:01:00.0: 0xEAC1: Condition still not met
after 20ms, skipping following opcodes
[ 4.148018] [drm] nouveau 0000:01:00.0: 0xC1DC: parsing output script 0
[ 4.148024] [drm] nouveau 0000:01:00.0: 0xC1DC: parsing output script 0
[ 4.269726] [TTM] Zone kernel: Available graphics memory: 2031612 kiB.
[ 4.269734] [drm] nouveau 0000:01:00.0: 1024 MiB VRAM
[ 4.281589] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 4.283436] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 4.286428] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc:
initialised FIFO 1
[ 4.286849] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 4.286852] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 4.286853] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 4.286855] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 4.286857] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 4.286898] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 4.286916] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 4.414983] alloc irq_desc for 21 on node 0
[ 4.414985] alloc kstat_irqs on node 0
[ 4.414991] ENS1370 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 4.471484] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb:
0x40250000, bo ffff88013bcfb000
[ 4.476198] [drm] nouveau 0000:01:00.0: 0x11F7: parsing clock script 0
[ 4.477610] Console: switching to colour frame buffer device 240x67
[ 4.480181] fb0: nouveaufb frame buffer device
[ 4.480182] registered panic notifier
[ 4.480190] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on
minor 0
[ 5.249125] Adding 7933944k swap on /dev/sda5. Priority:-1 extents:1
across:7933944k
[ 5.401290] EXT3 FS on sda1, internal journal
[ 5.457872] loop: module loaded
[ 6.796374] usb-storage: device scan complete
[ 6.804802] scsi 6:0:0:0: Direct-Access Y-E DATA USB-FDU
6.01 PQ: 0 ANSI: 0 CCS
[ 6.805097] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 6.884608] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 7.530931] fuse init (API version 7.13)
[ 7.832075] RPC: Registered udp transport module.
[ 7.832077] RPC: Registered tcp transport module.
[ 7.832078] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.905099] Installing knfsd (copyright (C) 1996 ***@monad.swb.de).
[ 8.098466] svc: failed to register lockdv1 RPC service (errno 97).
[ 8.099114] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 8.117201] NFSD: starting 90-second grace period
[ 9.052709] r8169 0000:02:00.0: firmware: requesting
rtl_nic/rtl8168d-2.fw
[ 9.090686] r8169 0000:02:00.0: eth0: unable to load firmware patch
rtl_nic/rtl8168d-2.fw (-2)
[ 9.097650] r8169 0000:02:00.0: eth0: link down
[ 9.097658] r8169 0000:02:00.0: eth0: link down
[ 9.098088] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.676787] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor
processors (3 cpu cores) (version 2.20.00)
[ 10.676824] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 10.676826] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 10.676827] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 10.676828] powernow-k8: 3 : pstate 3 (800 MHz)
[ 10.791427] r8169 0000:02:00.0: eth0: link up
[ 10.792861] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.873258] lp0: using parport0 (interrupt-driven).
[ 16.934725] ppdev: user-space parallel port driver
[ 20.982368] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 20.989854] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc:
initialised FIFO 2
[ 21.020682] eth0: no IPv6 routers present
[ 41.897320] CPUFREQ: Per core ondemand sysfs interface is deprecated -
up_threshold
[ 42.140366] CPU0 attaching NULL sched-domain.
[ 42.140376] CPU1 attaching NULL sched-domain.
[ 42.140404] CPU2 attaching NULL sched-domain.
[ 42.184860] CPU0 attaching sched-domain:
[ 42.184869] domain 0: span 0-2 level MC
[ 42.184875] groups: group ffff88000520fbf0 cpus 0 group
ffff88000524fbf0 cpus 1 group ffff88000528fbf0 cpus 2
[ 42.184896] CPU1 attaching sched-domain:
[ 42.184901] domain 0: span 0-2 level MC
[ 42.184906] groups: group ffff88000524fbf0 cpus 1 group
ffff88000528fbf0 cpus 2 group ffff88000520fbf0 cpus 0
[ 42.184922] CPU2 attaching sched-domain:
[ 42.184926] domain 0: span 0-2 level MC
[ 42.184931] groups: group ffff88000528fbf0 cpus 2 group
ffff88000520fbf0 cpus 0 group ffff88000524fbf0 cpus 1